bmline100

La sezione principale

Moderatore: F.Calabrese

discohouse
Messaggi: 916
Iscritto il: sabato 14 febbraio 2015, 14:59

bmline100

Messaggio da discohouse » martedì 20 febbraio 2018, 20:38

Queste sono una specie di mostro ?

http://bmline100.com
Andrea

F.Calabrese
Messaggi: 41590
Iscritto il: giovedì 23 settembre 2010, 16:18
Località: Roma
Contatta:

Re: bmline100

Messaggio da F.Calabrese » martedì 20 febbraio 2018, 20:57

In effetti ci somigliano... e neanche poco...!

Saluti
F.C.

Telstar
Messaggi: 329
Iscritto il: giovedì 9 dicembre 2010, 0:15
Località: Milano

Re: bmline100

Messaggio da Telstar » martedì 20 febbraio 2018, 22:23

Ma che schifezza di sito! Sono delle slide non un sito :/
(L’imformatico in me si ribella a guardarlo)
The response of the inner ear extends to at least 200khz - Dr W. Tempest

battespl
Messaggi: 88
Iscritto il: mercoledì 18 maggio 2016, 20:49

Re: bmline100

Messaggio da battespl » mercoledì 21 febbraio 2018, 11:28

A quando un sistema marchiato f.c con estetica curata come questi diffusori , amplificazione e dsp integrato ?

elettro
Messaggi: 1996
Iscritto il: venerdì 3 maggio 2013, 9:13

Re: bmline100

Messaggio da elettro » mercoledì 21 febbraio 2018, 14:10

Slide a parte, sono del tutto simili ad un progetto di Fabrizio, mi chiedo come si interfacciano in ambiente le bocche dei bassi con quella configurazione..? se avessero eseguito un set per aasociare quel diffusore alle pareti laterali era certamente meglio. :idea: :idea: :idea: :idea: :idea:

elettro
Messaggi: 1996
Iscritto il: venerdì 3 maggio 2013, 9:13

Re: bmline100

Messaggio da elettro » mercoledì 21 febbraio 2018, 14:13

Ho visionato il loro data sheet, mi pare garantiscano - in grafico - una buona direttività, soprattutto spicca la linearità di risposta in frequenza della tromba dei medio-alti...possibile..?

fonometropazzo
Messaggi: 274
Iscritto il: venerdì 15 luglio 2016, 21:14

Re: bmline100

Messaggio da fonometropazzo » mercoledì 21 febbraio 2018, 14:46

Non fatevi illusioni... credo che sia l' ennesimo catafalco, guardate bene l' altoparlante che si intravede qui:

Immagine
image hosting

ecco di cosa molto probabilmente si tratta:

Immagine
upload image

qui altre info:
https://www.rgsound.it/my-5-fibreglass- ... 20952.html

o nel migliore dei casi:
https://www.audax-speaker.de/index.php? ... e=&lang=en

un AUDAX HM210C0

Un altoparlantino per hifi car da 20cm, con sospensione in foam, basta questo per capire a che livelli è il progettista se cosi lo vogliamo chiamare.
Ultima modifica di fonometropazzo il mercoledì 21 febbraio 2018, 14:59, modificato 2 volte in totale.

F.Calabrese
Messaggi: 41590
Iscritto il: giovedì 23 settembre 2010, 16:18
Località: Roma
Contatta:

Re: bmline100

Messaggio da F.Calabrese » mercoledì 21 febbraio 2018, 14:49

Se è per questo c'è di peggio...!
BM Line 100 | The High-Range Horn
A newly designed cylinder wave emitting element takes over the transmission of the mid-/high wave band above 800 Hz. In co-operation with the Fraunhofer Institute for Applied Mathematics we have been successful in developing a slit shaped emitter of the highest quality with an extremely powerful drive.


In a cylinder wave field, sound energy decreases by 3dB for every doubling of the distance, compared to a reduction of 6dB in a normal spherical wave field. This means that with the BM Line 100, the listening position is always in the near field, even in larger living rooms, which means the intensity of the sound in your ear is clearly influenced by direct rather than indirect sound. The result is that the influence the room has on the music is reduced to a minimum. An additional directional emitter further reduces reflections from the ceiling and floor. With an exactly defined impulse and sophisticated sound the resulting listening experience is completely different.
Qui si dice una sciocchezza leggendaria... in quanto con le sorgenti cilindriche (alle alte frequenze) le riflessioni arrivano addirittura più forti dell'emissione diretta...!!!

Ho le misure (di altri sistemi) che lo provano...!

Saluti
F.C.

F.Calabrese
Messaggi: 41590
Iscritto il: giovedì 23 settembre 2010, 16:18
Località: Roma
Contatta:

Re: bmline100

Messaggio da F.Calabrese » mercoledì 21 febbraio 2018, 14:53

Qualcuno riesce a tradurre questa prosa marziana...??? :lol: :lol: :lol: :lol: :lol:
BM Line 100 | The High-Range Horn

A newly designed cylinder wave emitting element takes over the transmission of the mid-/high wave band above 800 Hz. In co-operation with the Fraunhofer Institute for Applied Mathematics we have been successful in developing a slit shaped emitter of the highest quality with an extremely powerful drive.


In a cylinder wave field, sound energy decreases by 3dB for every doubling of the distance, compared to a reduction of 6dB in a normal spherical wave field. This means that with the BM Line 100, the listening position is always in the near field, even in larger living rooms, which means the intensity of the sound in your ear is clearly influenced by direct rather than indirect sound. The result is that the influence the room has on the music is reduced to a minimum. An additional directional emitter further reduces reflections from the ceiling and floor. With an exactly defined impulse and sophisticated sound the resulting listening experience is completely different.
Oddio... io concetto di "Jet" che schizza suoni... ha un che di surreale... :lol: :shock: :o :lol:

Saluti
F.C.

battespl
Messaggi: 88
Iscritto il: mercoledì 18 maggio 2016, 20:49

Re: bmline100

Messaggio da battespl » mercoledì 21 febbraio 2018, 16:26

fonometropazzo ha scritto:
mercoledì 21 febbraio 2018, 14:46
Non fatevi illusioni... credo che sia l' ennesimo catafalco, guardate bene l' altoparlante che si intravede qui:

Immagine
image hosting

ecco di cosa molto probabilmente si tratta:

Immagine
upload image

qui altre info:
https://www.rgsound.it/my-5-fibreglass- ... 20952.html

o nel migliore dei casi:
https://www.audax-speaker.de/index.php? ... e=&lang=en

un AUDAX HM210C0

Un altoparlantino per hifi car da 20cm, con sospensione in foam, basta questo per capire a che livelli è il progettista se cosi lo vogliamo chiamare.

A me sembra che sia una sospensione piatta in foam tipo audax pr170xo , magari è un custom phl audio .

Rispondi